UNIASEN has specialized in wholesale pipe fittings for 17 years. We have a wide variety and our products comply with international standards. Different sizes and shapes for your choice.
Type: Pipe Elbow, Pipe Tee, Pipe Reducer, Pipe Cross, Coupling, Flange.
45 Deg Elbow
90 Deg Elbow
180 Deg Elbow
SR Elbow (Short Radius Elbow)
LR Elbow (Long Radius Elbow)
Socket Weld 45 Deg Elbow
Socket Weld 90 Deg Elbow
Threaded / Screwed 45 Deg Elbow
Threaded / Screwed 90 Deg Elbow
Threaded / Screwed Street Elbow
Equal Tee
Reducing / Unequal Tee
Socket Weld Tee
Socket Weld Unequal Tee
Threaded / Screwed Tee
Eccentric Reducer
Concentric Reducer
Equal Cross
Socket Weld Cross
Socket Weld Unequal Cross
Threaded / Screwed Cross
Socket Weld Half Coupling
Socket Weld Full Coupling
Weld Neck Flanges (WNRF)
Long Weld Neck Flanges
Slip On Flanges (SORF)
Blind Flanges (BLRF)
Socket Weld Flanges (SWRF)
Threaded / Screwed Flanges
Lap Joint Flanges
Plate Flanges
Reducing Flanges
| Procedure | Pipe Fitting |
|---|---|
| Dimensions | 10.3mm and up |
| 1/8″ and up | |
| DN6 and up | |
| Thickness | 1.24mm and up |
| SCH 5S ~SCH XXS | |
| Unit Length | As per standard or customized |
| Standards | ASME/ANSI B16.1 |
| ASTM A234 | |
| BS 10 | |
| EN 10241 | |
| JIS B2311 | |
| Surface Coating | Varnishing, Oiling, Hot Dip Galvanizing |
| FBE, 2PP, 3PP, 2PE, 3PE | |
| End Type | Plain, Bevelled, Threaded, Grooved |
| Joint Method | Fitting, Flange, Coupling, Clamp, Pipe Shoulder, Welding |
| Pipe Machining | Welding, Bending, Hole Drilling, Punching, Swaging, Tapering, Flaring, Expanding |
| Application | Oil & Gas, Water Transmission, Solar Energy, Fire Fighting, Construction, Piling Work, Mechanical Engineering, Fabrication |
This welding technique is utilized to unite two or more pieces, involving the weld, fusion zone, and heat-affected zone. Fusion welding employs a high-temperature heat source for creating the welded connection.
Such as Eccentric Reducer, Concentric Reducer, 90 Deg Elbow and other pipe fittings adopt this connection method.
Socket Weld Fittings are commonly used to connect fittings in piping systems. The connection method is to insert the pipe into a sleeve of appropriate size, and then weld the joint of the sleeve and the pipe to connect. This type of connection is usually used for small-bore pipes and is suitable for high-pressure or high-temperature environments. Commonly used in Socket Weld Cross, Socket Weld Tee and other pipe fittings.
Welded Pipe
SSAW Steel Pipe
Hollow Structural Section
Seamless Steel Pipe
Pipe Fittings Pipe Fittings
Fire Sprinkler Pipe
Line Pipe
ASTM A106 Seamless Steel Pipe
