JIS G3461 Carbon Steel Tubes for Boiler and Heat Exchanger

JIS G 3461 Carbon Steel Boiler and heat exchanger tube

OD range: 15.9mm to 139.8mm.
Production process: Seamless and electric resistance welding.
Steel grades we offer: STB340 (STB35), STB410 (STB42) and STB510 (STB52).

JIS G3461 carbon steel boiler and heat exchanger tubes transfer heat well, inside and out. They are ideal for water pipes, smoke tubes, superheater tubes, and air preheaters. These tubes are also useful in the chemical and petroleum industries. However, they are not suitable for low temperature services.

All of our pipes are cold normalized before processing. They are either normalized or quenched and tempered, per their manufacturing process. This meets the high-temperature service requirements.

UNIASEN makes small tubes for compact heat exchangers and large tubes for industrial boilers. We follow Japanese Industrial Standards for carbon steel tube manufacturing. This ensures the highest quality and performance in the steel tubes you receive.

Ücretsiz Teklif Alın

JIS G3461 Specification

Üretim Standardı	JIS G3461
Üretim Süreçleri	BW, ERW, SMLS
Dış Çap	DN10 – DN125
Duvar Kalınlığı	1.2mm – 12.5mm
Boru Uzunluğu	belirli, rastgele
Çelik Sınıfı	STB340, STB410, STB510
Korozyon Önleme	Cila, Vernik, Yağlama, Galvanizleme
Son Süreçler	Kare Kesim, Kaynak Ağzı Açma, Diş Açma, Soket
Daha Fazla İşlem	Kaynak, Bükme, Delik Delme, Delme, Swaging, Konikleştirme, Genişletme

Dimension of JIS G3461

İzin Verilen Belirtilen Dış Çap ve Belirtilen Et Kalınlığı
Belirtilen Dış Çap D mm (inç)	Belirtilen Duvar Kalınlığı t mm (inç)
Belirtilen Dış Çap D mm (inç)	Özel Işık Boyutları a	Normal Bedenler
≥ 10,3 (0,405) ila < 13,7 (0,540)	-	≥ 1,7 (0,068) ila ≤ 2,4 (0,094)
≥ 13,7 (0,540) ila < 17,1 (0,675)	-	≥ 2,2 (0,088) ila ≤ 3,0 (0,118)
≥ 17,1 (0,675) ila < 21,3 (0,840)	-	≥ 2,3 (0,091) ila ≤ 3,2 (0,125)
≥ 21,3 (0,840) ila < 26,7 (1,050)	-	≥ 2,1 (0,083) ila ≤ 7,5 (0,294)
≥ 26,7 (1,050) ila < 33,4 (1,315)	-	≥ 2,1 (0,083) ila ≤ 7,8 (0,308)
≥ 33,4 (1,315) ila < 48,3 (1,900)	-	≥ 2,1 (0,083) ila ≤ 10,0 (0,394)
≥ 48,3 (1,900) ila < 60,3 (2,375)	-	≥ 2,1 (0,083) ila ≤ 12,5 (0,492)
≥ 60,3 (2,375) ila < 73,0 (2,875)	≥ 2,1 (0,083) ila ≤ 3,6 (0,141)	> 3,6 (0,141) ila ≤ 14,2 (0,559)
≥ 73,0 (2,875) ila < 88,9 (3,500)	≥ 2,1 (0,083) ila ≤ 3,6 (0,141)	> 3,6 (0,141) ila ≤ 20,0 (0,787)
≥ 88,9 (3,500) ila < 101,6 (4,000)	≥ 2,1 (0,083) ila ≤ 4,0 (0,156)	> 4,0 (0,156) ila ≤ 22,0 (0,866)
≥ 101,6 (4,000) ila < 168,3 (6,625)	≥ 2,1 (0,083) ila ≤ 4,0 (0,156)	> 4,0 (0,156) ila ≤ 25,0 (0,984)
≥ 168,3 (6,625) ila < 219,1 (8,625)	≥ 2,1 (0,083) ila ≤ 4,0 (0,156)	> 4,0 (0,156) ila ≤ 40,0 (1,575)
≥ 219,1 (8,625) ila < 273,1 (10,750)	≥ 3,2 (0,125) ila ≤ 4,0 (0,156)	> 4,0 (0,156) ila ≤ 40,0 (1,575)
≥ 273,1 (10.750) ila < 323,9 (12.750)	≥ 3,6 (0,141) ila ≤ 5,2 (0,203)	> 5,2 (0,203) ila ≤ 45,0 (1,771)
≥ 323,9 (12.750) ila < 355,6 (14.000)	≥ 4,0 (0,156) ila ≤ 5,6 (0,219)	> 5,6 (0,219) ila ≤ 45,0 (1,771)
≥ 355,6 (14.000) ila < 457 (18.000)	≥ 4,5 (0,177) ila ≤ 7,1 (0,281)	> 7,1 (0,281) ila ≤ 45,0 (1,771)
≥ 457 (18.000) ila < 559 (22.000)	≥ 4,8 (0,188) ila ≤ 7,1 (0,281)	> 7,1 (0,281) ila ≤ 45,0 (1,771)
≥ 559 (22.000) ila < 711 (28.000)	≥ 5,6 (0,219) ila ≤ 7,1 (0,281)	> 7,1 (0,281) ila ≤ 45,0 (1,771)
≥ 711 (28.000) ila < 864 (34.000)	≥ 5,6 (0,219) ila ≤ 7,1 (0,281)	> 7,1 (0,281) ila ≤ 52,0 (2,050)
≥ 864 (34.000) ila < 965 (38.000)	-	≥ 5,6 (0,219) ila ≤ 52,0 (2,050)
≥ 965 (38.000) ila < 1422 (56.000)	-	≥ 6,4 (0,250) ila ≤ 52,0 (2,050)
≥ 1422 (56.000) ila < 1829 (72.000)	-	≥ 9,5 (0,375) ila ≤ 52,0 (2,050)
≥ 1829 (72.000) ila < 2134 (84.000)	-	≥ 10,3 (0,406) ila ≤ 52,0 (2,050)
NOTE Standardized values for specified outside diameter and specified wall thickness of pipe are given in ISO 4200 [7] and ASME B36.10M[8]
a Pipe having the combination of specified outside diameter and specified wall thickness is defined as special light size pipe; other combinations given in this table are defined as regular size pipe.

JIS G3461 Chemical Requirement

Our JIS G 3461 Carbon Steel Tubes. Their chemical composition is carefully regulated during manufacturing. This ensures they can withstand the high temperatures and pressures in boilers and heat exchangers. This precise control of the chemical composition makes the tubes resistant to corrosion and wear. It extends their service life and reduces maintenance needs.

Sınıfın Sembolü	C	Si	Mn	P	S
STB 340	0,18 maks.	0,35 maks.	0,30 ila 0,60	0,035 maks.	0,035 maks.
STB 410	0.32 max.	0,35 maks.	0,30 ila 0,80	0,035 maks.	0,035 maks.
STB 510	0,25 maks.	0,35 maks.	1.00 to 1.50	0,035 maks.	0,035 maks.

Mechanical Requirement of JIS G3461

At UNIASEN we recognise the critical role that mechanical properties play in the performance of heat exchangers and boilers. Our JIS G 3461 carbon steel tubes are able to withstand the stresses and strains of high temperature service. These tubes are heat treated, either normalised or quenched and tempered, to enhance their mechanical properties and ensure they provide optimum performance under demanding conditions.

Mekanik Özellikler
Sınıfın Sembolü	Çekme Dayanımı N/mm2	Yield Point or Proof Stress N/mm2	Uzama %
			Outside Diameter under 10 mm	Outside Diameter 10 mm or over to and excl.20 mm	Outside Diameter 20 mm or over
			Outside Diameter under 10 mm	Outside Diameter 10 mm or over to and excl.20 mm	Outside Diameter 20 mm or over
			Test Piece for Tensile Test
			No. 11 Test Piece	No. 11 Test Piece	No. 11 or No. 12 Test Piece
STB 340	340 min.	175 min.	27 dakika.	30 dakika.	35 min.
STB 410	410 dakika.	255 min.	17 dakika.	20 dakika.	25 dakika.
STB 510	510 min.	295 min.	17 dakika.	20 dakika.	25 dakika.
NOT: 1 N/mm2=1 MPa