EN 10210 Hot Finished Structural Hollow Sections

api 5l-api 5l gr.b-api 5l material specification

What is EN 10210?

At UNIASEN, we specialize in providing top-tier EN 10210 Hot Finished Structural Hollow Sections. Crafted from non-alloy and fine grain steels, these sections are engineered to meet the exacting standards of the European Standard EN 10210. Our hot finished hollow sections are either formed hot, with optional subsequent heat treatment, or formed cold followed by heat treatment to achieve the same metallurgical conditions as those in the hot formed product. The exceptional mechanical properties of our hot finished hollow sections contribute to the weight reduction of building structures, offering a superior alternative to cold formed hollow sections. Choose UNIASEN for unparalleled quality in structural hollow sections.

Specification

Our EN 10210 Hot Finished Structural Hollow Sections are available in a diverse range of dimensions to meet your specific project requirements. The production processes we employ guarantee consistent quality across our product range. We offer various steel grades including S235JRH, S275JOH, S275J2H, S355JOH, and S355J2H. Our hollow sections can be supplied with different surface coatings for enhanced durability and lifespan. We provide a variety of end types and joint methods to accommodate your construction needs. Moreover, our machining services are at your disposal for tailored solutions for your unique project requirements.

Standard: EN10210
Procedure: ERW, SMLS
Steel Grade: S235JRH,S275J0H,S275J2H,S355J0H,S355J2H,S355K2H
Usage: Mechanical tubing liquid transport steel pipe, general structure, mechanical structure transport liquid, gas, oil
Dimensions: Circular:≤2500mm

Square:≤800mm*800mm

Rectangular:≤750mm*500mm

Elliptical:≤500mm*250mm

Tolerance: OD: Circular: ±1% with a minimum of ±0.5mm and a mamximum of ±10mm

Rectangular and Square: ±1% with a minimum of ±0.5mm

Thickness: -10%

Mass: ±6% on individual delivered lengths

Random Length: 4000≤L≤16000 with a range of 2000 per order item 10% of sections supplied may be below the minimum for the ordered range but not shorter than 75% of the minimum range length
Approximate Length: 4000≤L≤16000: ±500mm
Exact length: 2000≤L≤6000: 0/ +10mm

＞6000: 0/ +15mm

Mandatory Test: Cast Analysis, Tensile test, Impact test, Surface condition and dimensions. For welded products: NDT of the weld
Optional tests: Product analysis, Tensile test in corner region, Impact test in corner region
Pipe Ends: Plain End/ Beveled End/ Grooved /Threaded
Coating: Black/Vanish/3PE/Galvanized/Fusion bond Expoxy Coating

Dimension

At UNIASEN, we recognize the critical role of precision in your projects. Our EN 10210 Hot Finished Structural Hollow Sections are offered in a broad range of dimensions, encompassing circular, square, rectangular, and elliptical forms. Each dimension is rigorously controlled to ensure an ideal fit for your construction needs. Whether your project calls for large, medium, or small dimensions, we have the capabilities to fulfill your requirements. Trust in UNIASEN to supply the most precise and reliable hollow sections for your construction endeavors.

Type	Outside Diameters	Outside Dimensions	Wall Thicknesses
Circular	Up to 2 500 mm	–	Up to 120 mm
Square	–	Up to 800 mm x 800 mm
Rectangular	–	Up to 750 mm x 500 mm
Elliptical	–	Up to 500 mm x 250 mm

Chemical Requirement

We strictly adhere to the chemical requirements for our EN 10210 Hot Finished Structural Hollow Sections. These sections are composed of non-alloy and fine grain steels, ensuring their robustness and longevity. The chemical composition of our hollow sections is stringently controlled during manufacturing to meet the European Standard EN 10210. This rigorous attention to detail guarantees that our products are of the highest caliber, providing you with dependable and durable structural components for your projects.

Chemical Composition — Cast Analysis For Product Thickness ≤ 120 Mm
Steel Grade		Type of Deoxidation	% by Mass, Maximum
Steel Grade			C Specified Thickness (mm)		Si	Mn	P	S	N
Steel Name	Steel Number		C Specified Thickness (mm)
Steel Name	Steel Number		≤ 40	＞ 40 ≤ 120
S235JRH	1.0039	FN	0.17	0.20	–	1.40	0.040	0.040	0.009
S275J0H	1.0149	FN	0.20	0.22	–	1.50	0.035	0.035	0.009
S275J2H	1.0138	FF	0.20	0.22	–	1.50	0.030	0.030	–
S355J0H	1.0547	FN	0.22	0.22	0.55	1.60	0.035	0.035	0.009
S355J2H	1.0576	FF	0.22	0.22	0.55	1.60	0.030	0.030	–
S355K2H	1.0512	FF	0.22	0.22	0.55	1.60	0.030	0.030	–

Chemical Composition — Cast Analyses For Product Thickness < 65 Mm
Steel Grade		Type of Deoxidation	Sub Group	% by Mass
Steel Name	Steel Number			C max.	Si max.	Mn	P max.	S max.	Nb max.	V max.	Al total min.	Ti max.	Cr max.	Ni max.	Mo max.	Cu max.	N max.
S275NH	1.0493	GF	QS	0.20	0.40	0.50 1.40	0.035	0.030	0.050	0.08	0.020	0.03	0.30	0.30	0.10	0.35	0.015
S275NLH	1.0497						0.030	0.025
S355NH	1.0539	GF	QS	0.20	0.50	0.90 1.65	0.035	0.030	0.050	0.12	0.020	0.03	0.30	0.50	0.10	0.35	0.020
S355NLH	1.0549			0.18			0.030	0.025
S420NH	1.8750	GF	SS	0.22	0.60	1.00 1.70	0.035	0.030	0.050	0.20	0.020	0.03	0.30	0.80	0.10	0.70	0.025
S420NLH	1.8751						0.030	0.025
S460NH	1.8953	GF	SS	0.22	0.60	1.00 1.70	0.035	0.030	0.050	0.20	0.020	0.03	0.30	0.80	0.10	0.70	0.025
S460NLH	1.8956						0.030	0.025

Mechanical Requirement

Our EN 10210 Hot Finished Structural Hollow Sections are produced to meet stringent mechanical requirements. These sections exhibit excellent mechanical properties, contributing to the weight reduction of building structures. The mechanical strength, resilience, and ductility of our hollow sections are tested and confirmed to ensure they meet the European Standard EN 10210. When you opt for UNIASEN, you are choosing structural components that are built to endure the harshest conditions and deliver exceptional performance.

Mechanical Properties Of Non-Alloy Structural Steel Hollow Section
Steel Grade		Minimum Yield Strength ReH MPa						Tensile Strength Rm MPa			Minimum Elongation Aab %				Minimum Impact Energy KV J
		Specified Thickness mm						Specified Thickness mm			Specified Thickness mm				At Test Temperature of
Steel Name	Steel Number	≤ 16	> 16 ≤ 40	> 40 ≤ 63	> 63 ≤ 80	> 80 ≤ 100	> 100 ≤ 120	≤ 3	> 3 ≤ 100	>100 ≤ 120	≤ 40	> 40 ≤ 63	> 63 ≤ 100	> 100 ≤ 120	-20℃	0℃	20℃
S235JRH	1.0039	235	225	215	215	215	195	360-510	360-510	350-500	26	25	24	22	–	–	27
S275J0H	1.0149	275	265	255	245	235	225	430-580	410-560	400-540	23	22	21	19	–	27	–
S275J2H	1.0138														27	–	–
S355J0H	1.0547	355	345	335	325	315	295	510-680	470-630	450-600	22	21	20	18	–	27	–
S355J2H	1.0576														27	–	–
S355K2H	1.0512														40	–	–

Mechanical Properties Of Fine Grain Structural Steel Hollow Sections
Steel Grade		Minimum Yield Strength ReH MPa			Tensile Strength Rm MPa at Specified Thickness ≤ 65 mm	Minimum Elongation A % at Specified Thickness ≤ 65 mm		Minimum Impact Energy KV J
Steel Name	Steel Number	Specified Thickness mm						At Test Temperature of
		≤ 16	> 16 ≤ 40	> 40 ≤ 65		Longitudinal	Transverse	-50℃	-20 °C
S275NH	1.0493	275	265	255	370-510	24	22	–	40
S275NLH	1.0497							27	–
S355NH	1.0539	355	345	335	470-630	22	20	–	40
S355NLH	1.0549							27	–
S420NH	1.8750	420	400	390	520-680	19	17	–	40
S420NLH	1.8751							27	–
S460NH	1.8953	460	440	430	540-720	17	15	–	40
S460NLH	1.8956							27	–

Steel Grades

We offer a range of steel grades for our EN 10210 Hot Finished Structural Hollow Sections, including S235JRH, S275JOH, S275J2H, S355JOH, and S355J2H. Each steel grade has been meticulously chosen for its unique properties and suitability for hot finished hollow sections. These steel grades offer a balance of strength, ductility, and resilience, making them ideal for a wide array of construction and engineering applications. With UNIASEN, you have the flexibility to select the steel grade that best aligns with your project needs.

Production Tolerance

At UNIASEN, we understand the significance of precision in your projects. That’s why we uphold strict production tolerances for our EN 10210 Hot Finished Structural Hollow Sections. Our production processes are designed to minimize variations and ensure consistent product quality. We adhere to the European Standard EN 10210 for production tolerances, ensuring that our hollow sections meet the exact dimensions and specifications required for your projects. With UNIASEN, you can have confidence in the accuracy and reliability of our products.

Welded Pipe

SSAW Steel Pipe

Hollow Structural Section

Seamless Steel Pipe

china pipe fitting-carbon steel pipe fittings

Pipe Fittings Pipe Fittings

Fire Sprinkler Pipe

Line Pipe

ASTM A106 Seamless Steel Pipe